Election Systems and Software (ES&S) Voting System

California counties that use ES&S AutoMARK:

Amador, Calaveras, Colusa, Contra Costa, Merced, Sacramento, Solano, Stanislaus, Tuolumne.


How to Vote Using the ES&S M100

Step 1:

  • Sign in at the polls.
  • You will receive your ballot card(s) and a secrecy holder to allow you to return your ballot in privacy.

 

Step 2:

  • Use only the pen provided by the poll worker to mark your ballot.
  • Mark the ballot by filling in the oval to the left of each of your selections.
  • Vote only one ballot card at a time.
  • Remember to check both sides of the ballot.
  • Do not vote for more than the number of candidates to be elected to each office.
  • If you make a mistake, do not try to correct it. Return the ballot to a poll worker and request another ballot.

 

Step 3:

  • After you have made your selections, check your ballot. Make sure the ovals are filled in completely.
  • When finished, place your ballot card(s), with the stub(s) attached, in the secrecy folder.
  • Return your ballot to the poll worker. The poll worker will tear off the stub(s) and return them to you and deposit your ballot in the ballot box or scanner.

 

How to Vote Using the ES&S AutoMARK

Activation

  • To begin, insert your ballot into the machine using a privacy sleeve to protect your ballot from view. A prompt on the screen will let you know that the AutoMARK is processing your ballot.

 

Instructions Screen

  • An instructions screen will appear. Carefully review the instructions, and touch the flashing "NEXT" button at the bottom of the screen to proceed to your ballot.

 

Zoom/Hight Contrast

  • At any time, you may choose to enlarge the letters on the screen by selecting the "zoom in" function. Or, you may choose to change the display to black and white by selecting the "high contrast" function. Both of these options are provided throughout the ballot marking process.

 

Step 1: Make Selections

  • Once your ballot is loaded onto the AutoMARK, you will begin to make selections for each candidate and/or issue for which you intend to cast a vote. To make a choice, touch the name or issue. Your selection will be highlighted in yellow and a black oval will appear. In high-contrast mode, you will see an "X" by your selection. Keep in mind that you may change any of your selections at any time.
  • Also be sure to note the number of candidates for whom you can vote. If you happen to make more selections than are allowed, an "Overvote" message will ask you to deselect a choice before proceeding.
  • Also be sure to note the number of candidates for whom you can vote. If you happen to make more selections than are allowed, an "Overvote" message will ask you to deselect a choice before proceeding.

step1 make selection image

step1 make selection image

step1 make selection image

 

Write In

  • The ES&S AutoMARK allows you to write-in candidates, as well. To cast a vote for a write-in candidate, touch the "WRITE-IN" option and a keyboard will appear on the screen.
  • Use the keyboard to type in the name of a candidate for whom you would like to cast a vote. Once you have entered the name, press "OK" and the name of your write-in selection will appear on your ballot.
  • Continue making and changing selections until you complete the ballot.

step1 write in

 

Step 2: Review Selections

  • After you have completed the last page of your ballot, a summary screen will appear, listing all of the selections you have made. Carefully review all of the items. To change a selection, touch the candidate or issue and re-select the proper choice.
  • Then, touch the "NEXT" button to return to the summary screen.

step2

 

Step 3: Mark Ballot

  • After you are satisfied with all of your selections, you are now ready to mark your ballot. To do so, touch the green "NEXT" button at the bottom of the screen. You will be asked to confirm that you would like to mark your ballot by touching the "Mark Ballot" prompt.
  • After a few seconds, a "Thank You For Using The ES&S AutoMARK" message will appear on the screen. This means you have successfully completed the ballot marking process. The machine will return your ballot.

step3

 

Step 4: Cast Ballot

  • Using the privacy sleeve to protect your selections from view, remove your ballot from the AutoMARK. Proceed to the tabulator or ballot box.

step4